PRODUCTS

This product is belong to  the foam filler material,
and can used in  packing or trasport all kinds cracks,
sealing fixed, waterproof, pipe insulation protection,
electricity proof for electronic components and fragile.
The best operate temperature for this product
is between 18 to 25, and the best humidity is 40-50%,
you can spay water accordingly if the humidity is low.
Normally, bubble jet table dry after 10 minutes,
1 hour after cured; Curing bubbles have heat preservation,
sound insulation, shockproof, insulation, waterproof, and other functions.

Specification：500ml×15
Code：B-1169
Shelf life ：3 years
Executive Standard：Q/GZBCL 52

Connect the plastic tube and the trigger;
Will trigger tighten the valve;
before use pls shake the can about 1 minute.
clean the surface about the object and convert the can,
use tube point the crack then spary the product.
pls fully spary the product if the construction area is large.

If eyes contacted, flush eyes with a directed stream
of water and call doctor immediately.
In case of accidental ingestion, consult physician immediately!
When spraying, keep the can upright,
angel between the can and the level should be
no less than 45 degrees.pls store in temperate
below 40C, far away from heat falme and do not crash,
puncture and burn the can,keep out of reach of children.